Vlookup  Return Multiple Values In One Cell (concatenate?) 

Vlookup  Return Multiple Values In One Cell (concatenate?)  Excel 
View Answers 
Hi,
I have a sheet like the one below:
A B
1 34
1 32
1 20
2 10
2 4
2 9
2 100
I would like to use a vlookup that looks up the value in column A and returns a string of all the values in B. E.g If i was looking up 1 it would return 34 32 20 as one text string.
I'm not too good at Arrays and Indexes etc so don't know what to use to do this.
Any help would be greatly appreciated. Many Thanks in advance.
Dixon
I have a sheet like the one below:
A B
1 34
1 32
1 20
2 10
2 4
2 9
2 100
I would like to use a vlookup that looks up the value in column A and returns a string of all the values in B. E.g If i was looking up 1 it would return 34 32 20 as one text string.
I'm not too good at Arrays and Indexes etc so don't know what to use to do this.
Any help would be greatly appreciated. Many Thanks in advance.
Dixon
Free Excel Courses
Similar Excel Tutorials
Full explanation of the Vlookup function in Excel, what it is, how to use it, and when you should use it. The Vlook ...
Perform a Vlookup that returns the highest value, lowest value, or average value from a dataset. Sections: Vlookup ...
How to use the Vlookup function to return a result that falls within a range of numbers, such as a weight or quanti ...
This tutorial shows you how to use the Vlookup function across multiple worksheets within Excel. This means that y ...
Subscribe for Weekly Tutorials
Helpful tutorials delivered to your email!
Helpful Excel Macros
 This UDF is a Vlookup function that searches the entire workbook in Excel. The syntax and usage of the function is exac
 This Excel Macro works like a better Vlookup function because it returns ALL of the matching results. Run the
 This is very similar to the other Vlookup type Macro in that it returns all of the results that match a particular se
 This macro will convert every formula in an entire workbook into its respective value. This is basically a quick way to
 This is the ultimate Lookup Macro for Excel. It will search every worksheet in the workbook and return all of the mat
Similar Topics
Hi, can anyone help me with the below...
Im looking for a vlookup formula which will give me the maximum number from a list which contains multiple matches, i.e.
Lookup number 1 from column A, then give me the largest number from column B
example table:
A B

1 5
2 2
1 11
3 2
4 5
the result would be 11
thanks all!
Im looking for a vlookup formula which will give me the maximum number from a list which contains multiple matches, i.e.
Lookup number 1 from column A, then give me the largest number from column B
example table:
A B

1 5
2 2
1 11
3 2
4 5
the result would be 11
thanks all!
Hello Everybody,
I am hoping for some assistance. Here is what I have....
I am trying to get counts of certain values.
This is in the same workbook but different sheets.
On sheet 1 is where my formula lies. In a cell, I want it to look at sheet 2 column B and look for instances of "A", then I want it to look in the same row it found "A" and look at the value in column "N" and evaluate if there is an amount. If there isn't skip it and don't count it, if there is a value count it if it falls within a given range.
An example of the formula is below...what am I missing?
=COUNTIF(Sheet2!B:B,(VLOOKUP(A,Sheet2!B:N,13,FALSE)=0:500))
=COUNTIF(Sheet2!B:B,(VLOOKUP(A,Sheet2!B:N,13,FALSE)=501:1000))
Thank you in advance for your assistance.
I am hoping for some assistance. Here is what I have....
I am trying to get counts of certain values.
This is in the same workbook but different sheets.
On sheet 1 is where my formula lies. In a cell, I want it to look at sheet 2 column B and look for instances of "A", then I want it to look in the same row it found "A" and look at the value in column "N" and evaluate if there is an amount. If there isn't skip it and don't count it, if there is a value count it if it falls within a given range.
An example of the formula is below...what am I missing?
=COUNTIF(Sheet2!B:B,(VLOOKUP(A,Sheet2!B:N,13,FALSE)=0:500))
=COUNTIF(Sheet2!B:B,(VLOOKUP(A,Sheet2!B:N,13,FALSE)=501:1000))
Thank you in advance for your assistance.
I have workbook in which I want to save a specific worksheet to a new file with only the values saved  all data in this worksheet are references to cells on another worksheet, which is using VLOOKUP to pull data from a database.
Found the following code and it gets me close, but it copies the cell references, not the values. It also allows me to specify the file name from a cell reference.
I want the new workbook file to simply be saved, not opened, and a message box to display stating where the file was saved (will always be in the same location on the LAN).
What modifications do I make to this to get this to work per above requirements?
Sub CopyMe()
Dim SaveMeAs As String
SaveMeAs = Sheets("Sheet1").Range("B2").Text
Sheets("Sheet3").Copy
ActiveWorkbook.SaveAs Filename:="C:\My Documents\" & SaveMeAs
End Sub
Found the following code and it gets me close, but it copies the cell references, not the values. It also allows me to specify the file name from a cell reference.
I want the new workbook file to simply be saved, not opened, and a message box to display stating where the file was saved (will always be in the same location on the LAN).
What modifications do I make to this to get this to work per above requirements?
Sub CopyMe()
Dim SaveMeAs As String
SaveMeAs = Sheets("Sheet1").Range("B2").Text
Sheets("Sheet3").Copy
ActiveWorkbook.SaveAs Filename:="C:\My Documents\" & SaveMeAs
End Sub
Hello All
I wonder if you could help with this one, I have a list of data like this (no spaces or other characters)
JN551122B
What I need to do is split each of the characters in to its own cell
if JN551122B was in cell A1 I'd want to return:
B2 C2 D2 E2 F2 G2 H2 I2 J2
J N 5 5 1 1 2 2 B
The nearest I have got is the right function, but it brings over the preceeding characters, and I need each character in its own cell. Hopefully I could copy/paste a formula and change the reference for each cell value, i.e. 1 would return J, 2 = N, 3 = 5, 4 = 5 etc.
Thanks for your help!
I wonder if you could help with this one, I have a list of data like this (no spaces or other characters)
JN551122B
What I need to do is split each of the characters in to its own cell
if JN551122B was in cell A1 I'd want to return:
B2 C2 D2 E2 F2 G2 H2 I2 J2
J N 5 5 1 1 2 2 B
The nearest I have got is the right function, but it brings over the preceeding characters, and I need each character in its own cell. Hopefully I could copy/paste a formula and change the reference for each cell value, i.e. 1 would return J, 2 = N, 3 = 5, 4 = 5 etc.
Thanks for your help!
I have entered a vlookup formula in a cell and it returns the correct value from the other worksheet. However when I copy the formula down it keeps returning the exact same value as the first cell. If I enter a formula in each individual cell it returns the correct value. Its driving me crazy ! I woyld be glad of any advice
Many Thanks
Karamazov
Many Thanks
Karamazov
Column 1 has roughly 20 rows of information. Cell C1 has the formula =A1.
Is there a formula so that when I drag C1 horizontally into D1, E1, F1, ..., the values placed in each cell will be =A2, =A3, =A4, ...
I do not want to transpose the values from column 1 into C1, D1,.... I want these cells to have a formula that links them up to column 1's values
Thanks
Is there a formula so that when I drag C1 horizontally into D1, E1, F1, ..., the values placed in each cell will be =A2, =A3, =A4, ...
I do not want to transpose the values from column 1 into C1, D1,.... I want these cells to have a formula that links them up to column 1's values
Thanks
I am looking for assistance in having one cell in a text format equals another cell that contains a time value in hh:mm format.
For example: Cell A1 has a time format (hh:mm) value of 04:00; which is the Start Time. I would like cell D1 to have a text format value of "04:00" (result is dependant upon what is entered in A1). I would duplicate the same formulas to reflect Stop Times in other cells.
My final result is to have another cell (F1) use the Concatenate formula to have the Start and Stop time shown in one cell as "04:00  12:30". The times would change based on the Time formated values entered into the Start and Stop time cells.
I have researched this in the board and found many excellent ways to do the opposite, but not convert Time format to Text format. Any assistance is greatly appreciated.
Shane
For example: Cell A1 has a time format (hh:mm) value of 04:00; which is the Start Time. I would like cell D1 to have a text format value of "04:00" (result is dependant upon what is entered in A1). I would duplicate the same formulas to reflect Stop Times in other cells.
My final result is to have another cell (F1) use the Concatenate formula to have the Start and Stop time shown in one cell as "04:00  12:30". The times would change based on the Time formated values entered into the Start and Stop time cells.
I have researched this in the board and found many excellent ways to do the opposite, but not convert Time format to Text format. Any assistance is greatly appreciated.
Shane
Hi
I am brand new to Mr. Excel and would love some advice.
I searched the boards pretty extensively but could not find what I am looking for...I apologize if this is a duplicate.
I am using Excel 2007
How do you automatically add rows and update values for cells to a linked worksheet in which rows have been added? For example: Sheet 1, columns A & B are linked to Sheet 2, columns A & B. Sheet 2 has values in A1:A5 & B1:B5 and Sheet 1, since it is linked, has the same info. I want to add a row in between 3 & 4 on Sheet 2 and want Sheet 1 to automatically add the same row and update the value of the cell in column A & B.
Any help is greatly appreciated!
John
I am brand new to Mr. Excel and would love some advice.
I searched the boards pretty extensively but could not find what I am looking for...I apologize if this is a duplicate.
I am using Excel 2007
How do you automatically add rows and update values for cells to a linked worksheet in which rows have been added? For example: Sheet 1, columns A & B are linked to Sheet 2, columns A & B. Sheet 2 has values in A1:A5 & B1:B5 and Sheet 1, since it is linked, has the same info. I want to add a row in between 3 & 4 on Sheet 2 and want Sheet 1 to automatically add the same row and update the value of the cell in column A & B.
Any help is greatly appreciated!
John
I am trying to work out how to calculate the geometric mean of a series of values, some of which are negative, ie. investment returns over a series of years with some negatives.
The Geomean function doesn't work because it only uses positive numbers.
Any help would be greatly appreciated.
The Geomean function doesn't work because it only uses positive numbers.
Any help would be greatly appreciated.
So I've got some data, which has the approximate form of a sine function. I want to find all the xaxis intercepts. I tried using the intercept function and swapping around the y values for the x values, but it only returns 1 value (so I'd guess it uses a linear regression to estimate a single line through the axis).
I was thinking of trying a nested if/and statement but I haven't quite figured out how to do it. Basically I want to identify the two values where it switches from positive to negative and also indentify the values where it goes negative to positive, I can then fit a straight line between them to find a better approximation of the intercept (though it might not be necessary). Preferably I'd like it all one function as I'm not doing it in VBA (I might do later though, we'll see).
Can anyone suggest how I'd find these value or the xintercept. Any help would be greatly appreciated.
I was thinking of trying a nested if/and statement but I haven't quite figured out how to do it. Basically I want to identify the two values where it switches from positive to negative and also indentify the values where it goes negative to positive, I can then fit a straight line between them to find a better approximation of the intercept (though it might not be necessary). Preferably I'd like it all one function as I'm not doing it in VBA (I might do later though, we'll see).
Can anyone suggest how I'd find these value or the xintercept. Any help would be greatly appreciated.
Entering time values in custom format [h]:mm:ss
Cells accept hours over 23,
Adding cells in column returns correct total time.
Have not found a way to multiply these cells by a $ hourly rate.
So use HOUR(cell ref) and MINUTE(cell ref) to capture values in referenced
cell  then use these values to calculate total payment for $rate per hour.
However, the HOUR(cell ref) formula returns the hours in excess of 24 when
the cell contains an hour value in excess of 23 (ie 27 hours returns 3).
Cells accept hours over 23,
Adding cells in column returns correct total time.
Have not found a way to multiply these cells by a $ hourly rate.
So use HOUR(cell ref) and MINUTE(cell ref) to capture values in referenced
cell  then use these values to calculate total payment for $rate per hour.
However, the HOUR(cell ref) formula returns the hours in excess of 24 when
the cell contains an hour value in excess of 23 (ie 27 hours returns 3).
I often use if statements to return empty cells, for example:
=IF(a1=0,"ERROR","")
The trailing "" returns an empty cell. The problem is, it is not TRULY empty. If I fill that formula down, I cannot, for example, jump from one "ERROR" cell to the next by hitting Ctrl arrowdown because it seems to think that these empty cells have contents.
Is there a way to designate, in such a formula as above, to return a TRULY empty cell?
Thanks
=IF(a1=0,"ERROR","")
The trailing "" returns an empty cell. The problem is, it is not TRULY empty. If I fill that formula down, I cannot, for example, jump from one "ERROR" cell to the next by hitting Ctrl arrowdown because it seems to think that these empty cells have contents.
Is there a way to designate, in such a formula as above, to return a TRULY empty cell?
Thanks
I have a very simple pivot table that I am trying to use as a data source for a VLOOKUP request. Unfortunately, every time I do it I get the result #NA. I have tried recreating the results from the pivot table in the worksheet next to it, and am able to use VLOOKUP on them successfully, but as soon as I point the VLOOKUP array to the pivot table, I get the #NA result
Can VLOOKUP be used on pivot tables? If so, is there any special syntax I need to use?
Thanks
Can VLOOKUP be used on pivot tables? If so, is there any special syntax I need to use?
Thanks
I have set up an excel file that helps put together different text components using the vlookup and concatenate formulas for use in one plain text document .
When I try to paste the finished result into notepad/textpad/word it adds extra double quote marks throughout the text. Does anyone know how to paste it without these marks?
Thanks!
When I try to paste the finished result into notepad/textpad/word it adds extra double quote marks throughout the text. Does anyone know how to paste it without these marks?
Thanks!
I am trying to write a formula that uses both an if statement and a vlookup statement.
It's for a house cleaning price list, with two sets of prices. I want the formula to say if the value in E7 is R, i want to lookup the value for the house in the second column. If the value in the cell is anything else, i want to lookup the value for the house in the third column.
So in sense, my formula should look like =IF (E7=1,"=VLOOKUP(A10,'Clean Prices'!$A$2:$C$58,2,FALSE)","=VLOOKUP(A10,'Clean Prices'!$A$2:$C$58,3,FALSE)")
But it doesn't work. Is it possible to nest a vlookup in an if statement?
It's for a house cleaning price list, with two sets of prices. I want the formula to say if the value in E7 is R, i want to lookup the value for the house in the second column. If the value in the cell is anything else, i want to lookup the value for the house in the third column.
So in sense, my formula should look like =IF (E7=1,"=VLOOKUP(A10,'Clean Prices'!$A$2:$C$58,2,FALSE)","=VLOOKUP(A10,'Clean Prices'!$A$2:$C$58,3,FALSE)")
But it doesn't work. Is it possible to nest a vlookup in an if statement?
Hi Guys
I have the following in G2:
=VLOOKUP(A2,Sheet1!A:D,4,FALSE)
The formula returns the correct result, which in this case is a number  2
When I fill down my range, the formula copies correctly, but every result is the same. 2.
However, if I go to the next cell down (G3) and activate it by pressing F2, and then hit Enter, the result changes and is now correct.
Any ideas whats going wrong?
I have the following in G2:
=VLOOKUP(A2,Sheet1!A:D,4,FALSE)
The formula returns the correct result, which in this case is a number  2
When I fill down my range, the formula copies correctly, but every result is the same. 2.
However, if I go to the next cell down (G3) and activate it by pressing F2, and then hit Enter, the result changes and is now correct.
Any ideas whats going wrong?
Today I ran into an odd problem. I typed in values for column A rows 1 through 10 then values for column B rows 1 through 10. then in column C, I made the formula C1=A1/B1. The math was correct it showed 542 in the C1 cell. So I dragged that formula down and it showed 542 in all column C cells which is not correct. And when I went to check to see if the formula was correctly dragged it was. For instance, the formula in C2 is =A2/B2 however the value of that cell showed 542 which was not the correct math/value.
But it gets even more weird. When I click on the Column C cells and then it shows the formula up top in the formula bar and if I put my cursor anywhere in the formula bar and hit Return the formula does not change however the correct value then appears in the Column C cell. It is like the act of putting the cursor in the formula activates it to work properly but until it is activated that C cell shows the value of the cell which it was dragged down from.
This is quite bizarre. Has anyone ever seen this before? I have no idea what is going on. I ran a scan for viruses and none were found. I tried it on several new/different spreadsheets but it keeps happening.
Thanks for any tips on this.
But it gets even more weird. When I click on the Column C cells and then it shows the formula up top in the formula bar and if I put my cursor anywhere in the formula bar and hit Return the formula does not change however the correct value then appears in the Column C cell. It is like the act of putting the cursor in the formula activates it to work properly but until it is activated that C cell shows the value of the cell which it was dragged down from.
This is quite bizarre. Has anyone ever seen this before? I have no idea what is going on. I ran a scan for viruses and none were found. I tried it on several new/different spreadsheets but it keeps happening.
Thanks for any tips on this.
Is it possible to assign values to names in a list, so that when you validate
it as a dropdown list, you can select a name from the dropdown and it's
corresponding value will be added to separate cell? Basically, I have survey
questions which have five possible responses: Excellent  Very Good  Good 
Fair  Poor. We want to assign a value to each, 5 for Excellent, 4 for Very
Good and so on, so that when a response is selected from a dropdown, it's
value appears in a separate cell (so that we can calculate a total and
average score from the selections).
Thanks
B
it as a dropdown list, you can select a name from the dropdown and it's
corresponding value will be added to separate cell? Basically, I have survey
questions which have five possible responses: Excellent  Very Good  Good 
Fair  Poor. We want to assign a value to each, 5 for Excellent, 4 for Very
Good and so on, so that when a response is selected from a dropdown, it's
value appears in a separate cell (so that we can calculate a total and
average score from the selections).
Thanks
B
Hi Everyone,
I have searched online and in help but can't seem to find the best solution...
I have values like 00904BB303D6 that need to become: 00:90:4B:B3:03:D6 (the value is always 12 digits, and the : needs to appear every two digits.) Is there a formula that can easily do this for me? Your suggestions are greatly appreciated!
Thanks in advance!!!!
I have searched online and in help but can't seem to find the best solution...
I have values like 00904BB303D6 that need to become: 00:90:4B:B3:03:D6 (the value is always 12 digits, and the : needs to appear every two digits.) Is there a formula that can easily do this for me? Your suggestions are greatly appreciated!
Thanks in advance!!!!
Hi guys,
would really appreciate anyones help with this.
I have a column full of textformatted fractions...
4/5
6/4
3/1
2/5
4/5
etc, etc.....the column is very long!!
I need to convert these to actual fractions...ones I can add to equations, allowing me to multiply and add.
If I highlight the column and goto "format Cells" and change to fraction, the values still stay in the left of the cell.....its only when I manually click on each individual cell, then tick the little green tick, does the cell validate, and the value in the cell moves to the right (and is therefore a proper value).....problem is I have to keep doing this for each individual cell.....and I have 70000+ cells in this column!
Any suggestions on how I could speed this up?
thanks
would really appreciate anyones help with this.
I have a column full of textformatted fractions...
4/5
6/4
3/1
2/5
4/5
etc, etc.....the column is very long!!
I need to convert these to actual fractions...ones I can add to equations, allowing me to multiply and add.
If I highlight the column and goto "format Cells" and change to fraction, the values still stay in the left of the cell.....its only when I manually click on each individual cell, then tick the little green tick, does the cell validate, and the value in the cell moves to the right (and is therefore a proper value).....problem is I have to keep doing this for each individual cell.....and I have 70000+ cells in this column!
Any suggestions on how I could speed this up?
thanks
I was wondering if anyone could help me out please?!?!
I need to have a cell on Sheet2 display the TEXT from a cell on Sheet1, is his possible??
Example:
Sheet1, Cell A1 contains a clients name and I would like to have Sheet2, Sheet3, Sheet4 etc... Display that clients name in a cell of my choosing (could be a different cell on each Sheet) automatically after entering it once on Sheet1, cell A1.
I thought this was possible but I can't seem to figure it out. I haven't done any real Excel work in quite a long time but I thought I had done this before a long time ago!! Any help would be GREATLY appreciated!! Thanks in advance...
P.S. If I use autosum to do this it just displays the number 0, obviously, since it is trying to add numbers...
I uploaded a copy of the spreadsheet, What I would like to happen is have the text from Sheet1,D4 automatically be placed in Sheet2,A1 and Sheet3, B2. Hope this helps
Aric
I need to have a cell on Sheet2 display the TEXT from a cell on Sheet1, is his possible??
Example:
Sheet1, Cell A1 contains a clients name and I would like to have Sheet2, Sheet3, Sheet4 etc... Display that clients name in a cell of my choosing (could be a different cell on each Sheet) automatically after entering it once on Sheet1, cell A1.
I thought this was possible but I can't seem to figure it out. I haven't done any real Excel work in quite a long time but I thought I had done this before a long time ago!! Any help would be GREATLY appreciated!! Thanks in advance...
P.S. If I use autosum to do this it just displays the number 0, obviously, since it is trying to add numbers...
I uploaded a copy of the spreadsheet, What I would like to happen is have the text from Sheet1,D4 automatically be placed in Sheet2,A1 and Sheet3, B2. Hope this helps
Aric
Good afternoon!
I'm working with Excel 2003 sp 3 on Windows xp.
I have been banging my head trying to jar loose the formula to calculate man days where 1 equals 8 hours. I have one that was given to me by a coworker:
=INT(Q3/8)+(((Q3/8)(INT(Q3/8)))*0.8)
That calculates man days from total hours. I need a formula that will total man days and return the man day answer. Example:
weekending 12/25 = 16.2 which is 16 man days and 2 hours
weekending 1/1 = 24.7 which is 24 man days and 7 hours
Total = 41 man days and 1 hour
I have also been asked if there was a way for a number to be entered into a spreadsheet and automatically put in order without a macro or "pushing a button".
Any advice is greatly appreciated!
Happy New Year!
~ Brenda ~
I'm working with Excel 2003 sp 3 on Windows xp.
I have been banging my head trying to jar loose the formula to calculate man days where 1 equals 8 hours. I have one that was given to me by a coworker:
=INT(Q3/8)+(((Q3/8)(INT(Q3/8)))*0.8)
That calculates man days from total hours. I need a formula that will total man days and return the man day answer. Example:
weekending 12/25 = 16.2 which is 16 man days and 2 hours
weekending 1/1 = 24.7 which is 24 man days and 7 hours
Total = 41 man days and 1 hour
I have also been asked if there was a way for a number to be entered into a spreadsheet and automatically put in order without a macro or "pushing a button".
Any advice is greatly appreciated!
Happy New Year!
~ Brenda ~
Hi,
Try this...
There are some valid datas in the cells A2 (Eg. 100), B2(Eg. 200), C2 and D2.
Data validation is used in cell K2 to limit it to a set of values.
Can we implement this formula?
IF(K2="Approved")
{
A2=A3; B2=B3; C2=C3; D2=D3; K2=K3;
}
ELSE
{
no change to any values.
}
Thanks in advance...
Try this...
There are some valid datas in the cells A2 (Eg. 100), B2(Eg. 200), C2 and D2.
Data validation is used in cell K2 to limit it to a set of values.
Can we implement this formula?
IF(K2="Approved")
{
A2=A3; B2=B3; C2=C3; D2=D3; K2=K3;
}
ELSE
{
no change to any values.
}
Thanks in advance...
Hey
I have three columns containing last name values from 3 different sources that I've brought into one sheet. I am trying to find a way to compare all three values to establish if they are the same.
Of the three values there is no master, Each value may be different. So essentially it would be like doing =IF(a1=a2=a3,"match", "nomatch")
But of course this isn't possible.
I don't care about obtaining detail about which value matches which. I just need true or false response as to whether all three values are the same or not.
Thanks for any help anyone can provide.
Aaz
I have three columns containing last name values from 3 different sources that I've brought into one sheet. I am trying to find a way to compare all three values to establish if they are the same.
Of the three values there is no master, Each value may be different. So essentially it would be like doing =IF(a1=a2=a3,"match", "nomatch")
But of course this isn't possible.
I don't care about obtaining detail about which value matches which. I just need true or false response as to whether all three values are the same or not.
Thanks for any help anyone can provide.
Aaz
I have a textbox in my userform where anything typed in the box is entered into cell A2 in my worksheet. However, multiple lines of text are not properly displayed in my worksheet. I have enabled MultiLine and EnterKeyBehaviour in the properties window of the textbox so I can type multiple lines in my textbox. The problem is that when I press the button to enter the text from my txtbox to cell A2, the cell doesn't actually display the text in separate lines. It just places a square symbol in the place that enter should have been pressed and the text should have been split into separate lines.
How can I get the separate lines of text in my textbox to be properly displayed in a cell? Thanks for your help in advance..
How can I get the separate lines of text in my textbox to be properly displayed in a cell? Thanks for your help in advance..