Close Window
Got an Excel Question?
TeachExcel.com

Vlookup Return Sum Of Multiple Columns

I am sure this has been posted before, but I've been looking for the answer in past posts for a while now and am getting impatient. I want to do a vlookup to return the sum of columns 2, 3 and 4. I know this can be done with:

=sum(vlookup($a$1,array,2)+vlookup($a$1,array,3)+vlookup($a$1,array,4))

However, I think there is a faster, more efficient way as I will have to do this same thing again, but with many more columns to sum.

Thanks


- Ask any question about Excel and have it answered in no time.

Similar Excel Tutorials


Full explanation of the Vlookup function in Excel, what it is, how to use it, and when you should use it. The Vlook ...

This tutorial shows you how to use the Vlookup function across multiple worksheets within Excel.  This means that y ...

Perform a Vlookup that returns the highest value, lowest value, or average value from a dataset. Sections: Vlookup ...

How to use the Vlookup function to return a result that falls within a range of numbers, such as a weight or quanti ...

Helpful Excel Macros


- This UDF is a Vlookup function that searches the entire workbook in Excel. The syntax and usage of the function is exac

- This is very similar to the other Vlookup type Macro in that it returns all of the results that match a particular se

- This Excel Macro works like a better Vlookup function because it returns ALL of the matching results. Run the

- This Excel macro allows you to filter a data set on multiple columns and criteria at once. This means that you can filt

- This macro reverses the order of a selected row or column in excel. It will completely reverse the data.

Similar Topics







I have a very simple pivot table that I am trying to use as a data source for a VLOOKUP request. Unfortunately, every time I do it I get the result #NA. I have tried recreating the results from the pivot table in the worksheet next to it, and am able to use VLOOKUP on them successfully, but as soon as I point the VLOOKUP array to the pivot table, I get the #NA result

Can VLOOKUP be used on pivot tables? If so, is there any special syntax I need to use?

Thanks


Hi, can anyone help me with the below...

Im looking for a vlookup formula which will give me the maximum number from a list which contains multiple matches, i.e.

Lookup number 1 from column A, then give me the largest number from column B

example table:
A B
-----
1 5
2 2
1 11
3 2
4 5

the result would be 11

thanks all!


I am trying to write a formula that uses both an if statement and a vlookup statement.

It's for a house cleaning price list, with two sets of prices. I want the formula to say if the value in E7 is R, i want to lookup the value for the house in the second column. If the value in the cell is anything else, i want to lookup the value for the house in the third column.

So in sense, my formula should look like =IF (E7=1,"=VLOOKUP(A10,'Clean Prices'!$A$2:$C$58,2,FALSE)","=VLOOKUP(A10,'Clean Prices'!$A$2:$C$58,3,FALSE)")

But it doesn't work. Is it possible to nest a vlookup in an if statement?


Hello Everybody,

I am hoping for some assistance. Here is what I have....

I am trying to get counts of certain values.

This is in the same workbook but different sheets.
On sheet 1 is where my formula lies. In a cell, I want it to look at sheet 2 column B and look for instances of "A", then I want it to look in the same row it found "A" and look at the value in column "N" and evaluate if there is an amount. If there isn't skip it and don't count it, if there is a value count it if it falls within a given range.

An example of the formula is below...what am I missing?

=COUNTIF(Sheet2!B:B,(VLOOKUP(A,Sheet2!B:N,13,FALSE)=0:500))
=COUNTIF(Sheet2!B:B,(VLOOKUP(A,Sheet2!B:N,13,FALSE)=501:1000))

Thank you in advance for your assistance.


I have set a VLOOKUP formula to match account numbers. How ever I have to
click double click on the cell before the formula recognises the account
number. I have to do this for each cell. I have tried different formats. It
is not saving me that much time.



I have entered a vlookup formula in a cell and it returns the correct value from the other worksheet. However when I copy the formula down it keeps returning the exact same value as the first cell. If I enter a formula in each individual cell it returns the correct value. Its driving me crazy ! I woyld be glad of any advice

Many Thanks

Karamazov


Hi Guys

I have the following in G2:

=VLOOKUP(A2,Sheet1!A:D,4,FALSE)

The formula returns the correct result, which in this case is a number - 2

When I fill down my range, the formula copies correctly, but every result is the same. 2.

However, if I go to the next cell down (G3) and activate it by pressing F2, and then hit Enter, the result changes and is now correct.

Any ideas whats going wrong?


I would like the contents of a selected active cell to be displayed in a certain other cell, say R4. When another cell is selected and active, that cell's contents should be displayed.

I have an array of 9 columns and 20 rows with equity symbols and conditionally formatted to show the severity of price movement in either direction.

Instead of typing in the value of whatever cell a trader is looking at I would like for them to just be able to click on the cell and have that symbol copied into R4 so some detailed information can be displayed for them.

Can't find a thing about this on any forum or msdn.

Hope I'm explaining this at least somewhat clearly.

Thanks.


Good afternoon,

Is there a way to enter a colon into a standard number to create a value that can be formatted into a 24 hour time value ?

eg a time is listed as 1345 with a general number format, and I want it returned as 13:45 witha custom format of hh:mm.

Other than creating a table and using a vlookup function, I am hoping there is a better way?

Darren


I have a spreadsheet with thousands of columns. Due to poor planning on my part I need to insert a column between each existing column (e.g. I need to insert a column between the existing columns A and B, B and C, etc...). I would rather not have to do this manually thousands of times. Is there an easy way to do this?

Thanks in advance.


I have set up an excel file that helps put together different text components using the vlookup and concatenate formulas for use in one plain text document .

When I try to paste the finished result into notepad/textpad/word it adds extra double quote marks throughout the text. Does anyone know how to paste it without these marks?

Thanks!


I'm attempting to filter columns E, G, and I all at the same time. I need to
display rows that have values greater than 0 in any one of those three
columns. So far I can only filter progressively. If I filter column E and
then filter column G, the second filter is only applied to the results of the
first filter.

Does anybody know if it's even possible to do what I'm trying to do?



Good mornng - I am new to the forum - my name is Jena

My question is this - I have a large spreadsheet with multiple columns of information. I want to sort it by a certain column. I know how to do this. My question is, once I'm done with my work I want to sort it back to the original "sort" but I'm not sure how they have it sorted. I've tried to figure out how they have it sorted but can't. Is there some way to go back to the original sort?

Thank you for your anticipated help.

Jena

I have workbook in which I want to save a specific worksheet to a new file with only the values saved - all data in this worksheet are references to cells on another worksheet, which is using VLOOKUP to pull data from a database.

Found the following code and it gets me close, but it copies the cell references, not the values. It also allows me to specify the file name from a cell reference.

I want the new workbook file to simply be saved, not opened, and a message box to display stating where the file was saved (will always be in the same location on the LAN).

What modifications do I make to this to get this to work per above requirements?

Sub CopyMe()
Dim SaveMeAs As String
SaveMeAs = Sheets("Sheet1").Range("B2").Text
Sheets("Sheet3").Copy
ActiveWorkbook.SaveAs Filename:="C:\My Documents\" & SaveMeAs
End Sub


Hi peeps

I want to combine data from several worksheets into one worksheet.

For example, I have data in Sheet1 (Columns A,B,C), data in Sheet2 (Columns A,B,C), data in Sheet3 (Columns A,B,C) all with varying amounts of rows. (All the rows contain text data).

I need to combine all of the data from the 3 sheets into a single sheet, Sheet4 (Columns A,B,C), eliminating the empty rows.

I've been looking into this for a while, and can't find anything that really helps. Anyone got any pointers of what to look into?

Any help will be beautiful.

Cheers



Hi,

I made a budget with many narrow columns and have turned the data into a table. I will only ever filter the data with the left-hand most column. However, all the other columns are filled each with the grey drop-down filter arrow button, and I can no longer see the headings of these columns and frankly seeing 50 little unused arrow buttons is rather ugly. Is there any way to simply remove the filter drop-down buttons on some columns or even all of them, just leaving a filter button at the heading of the first column? I know I can hide the headings, but then I lose sight of the first filter arrow that I use.

Sorry to ask such a bizarre question, but I appreciate your help.

Thanks


This is my first post in these forums.
I am trying to create a formula which will look at the data in columns A - I (50 rows) and copy this data to columns K - S but ignoring any blank cells. Thereby consolidating the data in the upper rows with no spaces.
I am sure there is a relativley simple answer but it is driving me mad!
Hope you "Guru's" can help

Thanks

Added example spreadsheet to aid assistance.


Is it possible to import a single text file into Excel, splitting the incoming data across multiple worksheets rather than a single worksheet? Each each row on the text file would be evaluated by the value in one of it's "columns" and written to the appropriate worksheet. The file is "!" delimited and has 11 columns for each row.

Currently, I import the file into one worksheet and cut/paste the rows manually into new worksheets/tabs. The files are very large, sometimes exceeding the 65,536 row limit, which I could avoid if the data was split out coming in.

Any help anyone could provide would be WONDERFUL. Thanks!


Some time ago I created a spreadsheet and greyed out the areas that weren't needed. Now I need to expand the spreadsheet and use more columns. Trouble is I've forgotten how to unhide those columns. I didn't write any macros and usings the right-click unhide method is proven futile. The sheet isn't protected which is puzzling since I can't get the mouse to even highlight any of the greyed out areas.

Any suggestions would be fantastic!
thanks


I'm working on an Excel file that it's size is about 90 M.B and that makes it very slow to deal with ... is there anyhow to make it faster ???
i use in it alot of formulas and conditional formats
thank u


How do I sort but have the other data move with the column I'm sorting? Whenever I sort, for example, by name, the address and phone numbers columns stay the same and are therefore incorrect with the newly sorted columns. I've looked everywhere.


is it possible to put two formulasinto one cell?

On the attached timesheet there are columns IN, OUT, IN,OUT
The lunch time is worked out by deducting 'C8 from C9' and this works fine when all 'IN, OUT' cells are filled in but for some reason when just the first two cells are filled in it gives a -12 hour answer.

looking at cell 'C11 ' in the attached worksheet, I currently have the formula
=IF(C13=0,","SUM(C9-C8)) The reason for this is to make it look tidy by having blank cells until a calculation is needed,, My problem is, If someone just comes in for the morning one day for instance 8am to 12 noon then they won't have lunch, but C11 will show -12:00
Can I put another formula into C11 to tell it not to deduct C8 from C9 until a time is put into C9.
The following is the sort of thing (many variations) I have been trying but because I'm hopeless at formulas I'm not having any success
Thanks

=IF(C13=0,","SUM(C9-C8))OR,IF(C9,ISBLANK,"",SUM(C9-C8)


I'm trying to freeze the widths of columns so that when users of the
worksheet are using it, they can't change the width. It's for editors who
write headlines for specific areas that can only be as long as the column is
wide or the text won't fit.



Hi there, longtime user firsttime poster. Looking for some help as I am a non-expert with macros. Here's what I'm trying to do:

We have to submit things to a certain regulatory body and we usually enter tasks in as soon as they come, do the submission, and then keep a record of that submission.

So, I have a workbook with two sheets, one is "TO DO", the other is "ARCHIVE". Both sheets have the same columns and everything. I am looking for a macro that will automatically cut a (row) from the TO DO sheet and paste it in into the ARCHIVE sheet once it is done, then delete the cut row from the TO DO list so it stays topped up.

The trigger for archiving is the columns M and N which are titled "Complete ?" and each has a validation drop down that says "YES". When both cells in columns M and N have the YES in them, I would like the macro to make the above mentioned actions.

I ran a search on the forums and found something similar, but not quite what I was looking for.

Any help?


I often use if statements to return empty cells, for example:

=IF(a1=0,"ERROR","")

The trailing "" returns an empty cell. The problem is, it is not TRULY empty. If I fill that formula down, I cannot, for example, jump from one "ERROR" cell to the next by hitting Ctrl arrow-down because it seems to think that these empty cells have contents.

Is there a way to designate, in such a formula as above, to return a TRULY empty cell?

Thanks



Related pages


microsoft excel analysis toolpak downloadexcel sqrtcalculating days between dates in excelregex exceltimesheet minute conversionexcel paste special values shortcutsine wave in excelconvert bak file to pdf onlinevba obfuscator234 prefixgolf shirt templateroundup in excelmultiplication in excel formulafantasy football schedule generatoralphabetize column in excelgenerate synonymssynonyms of excelconvert csv to qif freevlookup to the leftpo template excelmachine downtime spreadsheetsample stock ledgerexcel vba sudoku solverexcel rename worksheettranspose excel tableopen sav file without spssnotepad csvlast cell in excelexcel replace in formularemoving macros from excelreorder pivot table rowsmicrosoft visual basic 6.0 common controlsdebtors days calculation formulavacation schedule template excelbillion to croreshide formula in excelcalculate the difference between two dates and times in excelexcel remove empty linesgratuity calculation formula in uaevlookup and pivot tableexcel rotate chartexcel 2007 autofit row heightcopy multiple rows in excelunprotect excel vbaprorated salary calculatorvlookup from different sheetturbo lister csvsave excel chart as picturecompare two columns in excel for matches using vlookupannualizing datavalidate email address in excelnearest udfunprotect excel forgot passwordline break in excel cellexcel querytablescombobox in excel vbamacro excel loopvba evaluate functionhow to prorate salarytimevalue vbaclear formatting in excelavailability calculation spreadsheetest to ist timingsconvert litres to gallons miles per gallondelete empty row excelpivot table templatesadding leading zeros in excelvlookup in 2 sheetshow to create a checklist in excelvba unprotecthow to unlock protected cells in excelruntime error 462excel formula to count dates